new safety light curtains from China manufacturer - China Feiyue United Electrical Group

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GAD10

Safety Light Curtains

Parameter:

Items	Safety light curtains
Model	GAD series
Detection Way	Trough beam type
Controller	SLC-1, SLC-P
Power supply	AC100-260V 50/60Hz DC24V
Consumption	<10W
Contact capacity	AC380V 10A
Relay lifespan	>1,000,000 times
Response time	<15ms
Ambient temperature	in operation -10~+55℃; in storage -25~+75℃
Ambient Humidity	in operation 35~85%RH; in storage 35~95%RH
Insulation Resistance	DC500V 100mΩ
Dielectric intensity	AC1500V, 50/60Hz, 1min
Light resistance	Sunlight 10000Lx, incandescent lamp light 3000Lx
Optical axis distance	10mm, 20mm, 40mm, 80mm
Material	Aluminum Alloy for safety light
Protection class	IP65
Protection length	0-12m

NPN, PNP output:

Items	Safety light curtain
Model	GAD series
Power supply	DC12-24V
Consumption	≤10W
Output way	NPN, PNP double output
Output Current	≤200mA

Model	A	B
GAD1012-8	70mm	160mm
GAD1012-16	150mm	240mm
GAD1012-24	230mm	320mm
GAD1012-32	310mm	400mm
GAD1012-40	390mm	480mm
GAD1012-48	470mm	560mm
GAD1012-56	550mm	640mm
GAD1012-64	630mm	720mm
GAD1012-72	710mm	800mm

Leads indication

GAD safety sensors wire connection

First, separately connect emitter red lead(DC12V), black lead(0V), blue lead(CP), yellow lead (CE), double lead(PE) with controller number 10, 11, 12, 13, 14 terminal. Then separately connect receiver red lead (DC12V), black lead (OV), blue lead (CP), yellow lead (CE), double lead(PE), white lead(PNP), brown lead(NPN) with controller number 7, 6, 5, 4,3, 2 terminal.

Connection figure of SLC_P optical screen controller and GAD area secure sensor

1. Power lead connection: See below, according to the working voltage marked on the SLC-P optical screen controller, AC100-260V.
2. T, K connection: T, K -the output signal connection point of area secure sensor, is the NO contact switch connection point, with load AC380V 10A and overload protection function.

Directly connected to PLC or PC(Connection of GAD Safety light curtains)

Firstly, connect the emitter red lead (DC-24V), black lead(0V) with DC power supply DC12-24V; then butt connecting blue lead (CP), yellow lead (CE), double lead (PE); finally, connect the receiver white (PNP) or brown(NPN) with PLC or PC signal input terminal.

Directly connected to load(Connection of GAD Safety light curtains)

NPN with directly connected to load

PNP with directly connected to load

Connection

-

-

-

-

Connect the leads of projector and receiver through aviation connector (note: the leads of projector are five-wire system: red, black, double, yellow, blue; while the leads of receiver are seven-wire system: red, black, double, yellow, blue, brown, white.)
Connect the red lead to device anode, black lead to cathode; butt connecting double lead, yellow lead, blue lead; connect brown lead to NPN input terminal of controller or connect the brown lead, white lead to double input terminal of relay (DC12-24V)( for polarity require, connect white lead to anode, brown lead to cathode of relay)
According to your demand, you could select the output form, either NPN output or PNP output, and then cut off the other lead or insulate it in case of any inconvenience.
In case of large disturbance, it is better to match electric, cabling with input, output lead from cable of high frequency, high voltage, strong current such as power line, pressure line and other signal lead.